All You Need to Know About Rooftop Rainwater Harvesting

The average Indian home consumes 350 litres of water every day. Plenty of this usage is reckless – and also expensive. In the summer, areas experiencing water shortage may end up spending up to Rs.2500 per month. Much of this can be optimised – with ease. This article will tell you, both, how to decrease your dependence on private suppliers, through rainwater harvesting, and give you several tips about conservation of water. So let’s begin:

What is Rainwater harvesting?

Rainwater Harvesting, also referred to as RWH, is a simple method of collecting rainwater and deploying the same for further usage. This is an increasingly important water conservation method in apartments and gated complexes. It is popular because it can result in significant savings and is easy to implement.

For example, in Panchsheel Park Colony in Delhi, a community of 1000 residents, pooled in Rs. 800 per flat in June 2004 to build a rainwater harvesting system. Today, they harvest more than 170 million litres of water annually – and this with Delhi’s meagre rainfall.

Expert water conservation tips

This is the best and most effective method of harvesting rainwater for apartments as it is less expensive and if implemented efficiently, helps in augmenting the groundwater level of the area. This is a system of catching rainwater where it falls. In this method, the roof becomes the catchment, and rainwater is collected from the roof of the building, which can either be stored in a tank or diverted to an artificial recharge system.

Watch well-known conservationist, Solar Suresh, discuss a few easy, cost-effective ways for societies to conserve water

Components of rooftop rainwater harvesting

The process involves transporting rainwater through pipes and drains, filtration and storage for reuse/recharge. Here are some common components involved in these stages:

1. Catchments

Surface which directly receives the rainfall and provides water to the system. It can be a paved area such as a building terrace or courtyard, or an unpaved area such as a lawn or an open ground. A roof made of reinforced cement concrete (RCC), galvanised iron or corrugated sheets can also be used.

Vikas Complex Cooperating Housing Society in Thane (W), successfully collected 59,1260 litres of water from a Catchment area of about 296 square metres (sq. m). Whereas, the average annual rainfall in Thane is about 2350 millimetre (mm).

2. Channels

Water is collected around the edge of a sloping roof in channels and is carried to a storage tank. The size of the channel depends on the flow during heavy rain. It is advisable to make them 10 to 15% larger. They can either be made from plain galvanised iron (GI) sheet, polyvinyl chloride (PVC) or even bamboo trunks.

3. Conduits

Pipelines or drains that transport rainwater from the catchment area to the harvesting system. Conduits can be of PVC or galvanised iron.

4. First-Flushing

A valve that ensures that runoff from the first spell of rain is flushed out and does not enter the system. This needs to be done since the first spell of rain carries a relatively larger amount of pollutants from the air and catchment surface.

5. Filter

Removes suspended pollutants from rainwater collected over the roof. A filter unit is a chamber filled with filtering media such as fibre, coarse sand and gravel layers to remove debris and dirt from water before it enters the storage tank or recharge structure.

6. Storage Facility

There are multiple options available based on the shape, size and material of construction.

  • Shape: Cylindrical, Rectangular and Square
  • Material: Reinforced cement concrete (RCC), ferrocement, masonry, plastic (polyethylene) or metal (galvanised iron) sheets
  • Position of the tank: Depending on space availability, these tanks could be constructed above ground, partly underground or fully underground. Some maintenance measures like cleaning and disinfection are required to ensure the quality of water stored in the container.

7. Recharge Structures

Rainwater may be charged into the groundwater aquifers, an underground layer of water-bearing permeable rock, rock fractures or unconsolidated materials such as gravel, sand, or silt, through any suitable structures like dugwells, borewells, recharge trenches and recharge pits.

  • Recharge trenches and permeable pavements: These recharge structures promote the percolation of water through soil strata at shallower depth.
  • Recharge wells: These structures conduct water to greater depths from where it joins the groundwater.
  • Recharge pits: The excavated pit, 1.5m to 3m wide and 2m to 3m deep, is lined with a brick/stone wall with openings (weep-holes) at regular intervals. The top area of the pit can be covered with a perforated cover. Design procedure is the same as that of a settlement tank.

Types of filters

  • Charcoal water filter: A simple charcoal filter can be made in a drum or an earthen pot. The filter is made of gravel, sand and charcoal, all of which are easily available.
  • Sand filter: Sand filters have commonly available sand as filter media. Sand filters are easy and inexpensive to construct. These filters can be employed for treatment of water to effectively remove turbidity (suspended particles like silt and clay), colour and microorganisms.
  • Rainwater Purification Centre (RainPC): A system designed for the conversion of rainwater to drinking water. Coming in a small compact 26 kg unit, the RainPC offers an affordable solution.

Advantages of implementing rooftop rainwater harvesting:

  1. Promotes water conservation and reduces water bills
  2. Mitigates on-road flooding and soil erosion within your complex
  3. The system is less expensive, easy to implement and requires less maintenance
  4. Diminishes the usage of potable water for varied purposes
  5. Reduces water consumption by as much as 40%

DIY water conservation tips

Did you know we use about 27% of water for bathing and toilet use. Here are 10 simple DIY tips that come in handy and if practiced diligently, can help conserve water.

1. Don’t waste the waste

Utilise RO waste water for other household purposes.Reuse grey water and reroute the runoff from your clothes washer and use that water for things like flushing the toilet or washing your car

2. Fix faulty faucets

A leaky faucet that drips at the rate of 1 drip per second can waste more than 11,360 litres per year. That’s the amount of water needed to take more than 180 showers!

3. Keep tabs on the taps

Don’t let the faucet running while cleaning veggies. Turning off water while brushing teeth saves 9.5 litres a minute.

4. Install showerheads and aerators

Shower heads control the water flow rate, which helps in reducing the amount of water consumed. A low-flow shower can help you save 34,540 litres per year, given a 10-minute shower time per day.

5. Switch to a low-flush toilet

Install a cistern displacement device to reduce the volume of water used in each flush.

6. Install a water meter

Monitor water consumption to control usage. What’s more, it is also helpful in detecting leaks.

7. Broom the sidewalks

A single sidewalk wash consumes about 303 litres of water, use a broom instead!

8. Water plants during mornings

Watering your plants during the day increases water consumption due to evaporation. Save 95 litres each time you water your plants either early mornings or late evenings.

9. Don’t run half-filled washing machines

Avoid half cleaning rounds and allow your washing machine to be filled before you get them spinning.

10. Don’t run the hose while washing your car

About 230 litres of water is consumed per car wash, make each drop count.

About MyGate

MyGate is India’s largest apartment management system, benefiting thousands of housing societies, developers, society facility managers, and millions of homeowners in every Indian city.

Disclaimer: Thank you for visiting our site. The information provided by MyGate (“we,” “us” or “our”) on (the “Site”) is for general informational purposes only. We strive to provide our readers with accurate information that helps learn more about the topics. It is not intended as a substitute for professional advice. We do not accept responsibility for the accuracy of information sourced from an external entity or take personal/ legal responsibility for your use of this information.

Community Living

What do you think?

Leave a Reply

Your email address will not be published. Required fields are marked *