After a long day at work in the summer, coming home to a broken air conditioner can cause much distress. An air conditioner, whether a split system or a window unit, relies on several mechanisms to keep the room cool. When it breaks down and does not cool the room effectively, there are just as many variables at play. The causes include inadequate maintenance or damage to a crucial component such as the compressor.

A general tip to avoid AC troubles is to get the appliance serviced regularly. The maximum usage is in the summer, so getting it serviced before the season will keep it in top-notch condition.

This article lists 6 specific reasons for an AC cooling problem along with suggestions to tackle them.

1. Unclean coils

After a long day at work in the summer, coming home to a broken air conditioner can cause much distress. An air conditioner, whether a split system or a window unit, relies on several mechanisms to keep the room cool. When it breaks down and does not cool the room effectively, there are just as many variables at play. The causes include inadequate maintenance or damage to a crucial component such as the compressor.

A general tip to avoid AC troubles is to get the appliance serviced regularly. The maximum usage is in the summer, so getting it serviced before the season will keep it in top-notch condition.

This article lists 6 specific reasons for an AC cooling problem along with suggestions to tackle them.

Solution: Clean the coils effectively using a vacuum hose. Keep the pressure medium so as not to damage the coils.

2. Obstructed air filter

If the split or window AC filter is clogged with dust and grime, air cannot flow freely, significantly reducing the air conditioner’s cooling capability.

Solution: If the AC filter is blocked, it is recommended that one gets it examined and replaced.

3. Low refrigerant/gas

The refrigerant or AC gas can escape. This can cause a drop in the pressure within the air conditioner and the freezing of the evaporator coils. Consequently, the drainage pan overflows with water.

Solution: Replace the AC refrigerant. The first step is to check the system, stop the compressor, and check the refrigerant. Then get the needed materials and replace the cylinder. If you are not confident of the process, hire an AC service.

4. Damaged drain pan

The drain pan usually collects condensate. It has likely cracked or rusted in an old air conditioner. In this situation, water will not get collected but leak through the main unit.

Solution: Replace the drain pan as soon as possible if it is cracked or damaged.

5. Incandescent lighting and inappropriate heat insulation

Ensure that the space is clear of unwanted heat sources to ensure that your air conditioner cools the room properly.

Solution: Reflective curtains should be used to cover or tint windows exposed to direct sunlight, and incandescent lighting should be replaced with more energy-efficient LED lights. These produce substantially less heat and help one save money on power costs.

6. Compressor failure

In an air conditioning system, the compressor is responsible for controlling the flow of the refrigerant between the evaporator and the condenser. If the condenser breaks, it cannot chill the air adequately.

Solution: Hire a professional to replace the damaged compressor.

Key takeaways

To clean your air conditioner, follow these simple steps:

1. Put off the electricity to the unit.
2. Remove any leaves, branches, or debris from the condenser fins, which is the thin metal mesh on the air conditioner’s exterior.
3. Use a soft-bristled brush attachment to vacuum the fins, while being careful not to bend them.
4. Clean around the motor by removing the grill from the top of the air conditioner.
5. Use a damp washcloth to wipe off the fan blades.

Conclusion

AC troubles result in a hot, stuffy environment. Timely servicing and resolving any trouble immediately is a great way to get the most out of an air conditioner this summer. A skilled technician will correctly analyze the problem and recommend the best remedy. It can save one’s time, effort, and money. However, it is vital to remember that air conditioners become inefficient with time, resulting in higher utility expenses.

FAQs

What is the location of the AC reset button?

Start looking for it outside your machine, particularly around the bottom edge. The reset button on an AC is usually red and conspicuous, so it should be easy to find. It can also be hidden behind the service panel within the machine. If you don’t see a reset button, your air conditioner probably doesn’t have one, and you’ll have to reset it manually.

Why does my air conditioner’s compressor turn off after 2 to 3 minutes?

If your air conditioner compressor shuts off after two or three minutes of operation, it is undoubtedly overheating or failing.

How can I get my air conditioner fan to spin?

To begin the fan whirling, slide a thin and long stick through the fan grate and push the blades gently, while being careful to keep your fingertips away from the grate. (A word of caution: Try NOT to do this with any conductive metal or substance. Use wood).

Buy Mygate smart locks

It is summertime in India, and the heat is truly on. The only way to beat the rising mercury is to switch on the air conditioner or, as we better know it, the AC.

Now, there is a distinct possibility that you might find your AC Leaking Water due to continuous use. There are many reasons for this leakage, including dirty AC filters or even poor AC installation. It is also a fact that a limited amount of water dripping from the AC is acceptable. However, when it occurs in excess, it becomes essential to repair it as soon as possible.

Here are a few facts explaining the factors that cause AC leakage and how to fix it. So, please read on to know everything about a leaking air conditioner.

What exactly causes excess water leakage in an AC?

When you find your AC leaking water, it is usually not because of one but several reasons. However, a few significant factors will answer the pertinent question: Why does AC leak water? They are as follows:

1. An unclean AC filter

A filter helps the air cooling device filter out dust and dirt from the atmosphere in every air conditioner. Therefore, you need to take care of filters regularly. The clogging of a filter leads to the evaporator getting frozen, causing excessive water dripping from AC.

2. Condensate tray damage

An air conditioner comprises condensate trays to collect condensed water. Moreover, if a tray is broken, damaged, or rusted, water seepage occurs, causing severe leakage while the AC is running.

3. Blocking of drain pipe

Drain pipes in an air conditioner carry water out of the unit. However, if large blocks begin to form in these pipes, water accumulates slowly, leading to the AC leaking water in excess.

4. Incorrect AC installation

Sometimes, your air conditioner could have been incorrectly installed, leading to excessive water dripping from AC. When the installation is not set up correctly, there could be a gap between the condensate tray and unit, leading to leakage. It is also possible that the drainpipe is exposed, which only leads to AC leaking water. You need to ensure the installation of the AC is completed with perfection.

5. Refrigerant level insufficiency

The refrigerant level inside your air conditioner must be on high and not low sides. Since if it is closer to the minimum and not the maximum range, then the pressure of the AC will decrease significantly. Leading to the freezing of the evaporator coil and eventually water dripping from AC.

How much is water leakage from AC considered normal?

You need not worry too much if you notice just a few droplets of water leaking from your air conditioner. It is a normal phenomenon, especially when you live in a place known for its hot and humid climate, wherein the process of condensation generally happens at a faster rate. However, when water dripping from AC gets excessive, you need to fix it as soon as possible.

How do you fix the problem of leakage in an AC?

In case you notice your AC leaking water in large proportions, and are therefore looking for the perfect solution to your leakage woes, then you need to check for the following:

1. Please look at your air conditioner and make sure that the filter inside it is clean. If you find it clogged or dirty, you need to clean it thoroughly.
2. Next, you need to look at drain pipes in your AC and clear any blockage you feel could prevent water from draining out of the device. Once you clean the drain pipes, the water will flow out smoothly and there will not be any leakage.
3. Finally, while installing an AC in your home, make sure it is done correctly. Doing so will help avoid severe AC leakages in the future. After all, “prevention is always better than cure”.

Since the air conditioner eventually relieves you from the scorching heat, it makes sense to get an annual maintenance contract. Professional cleaners will be sent to your home every few months to service your air-conditioner. They will de-clog the pipes and replace the damaged parts. In other words, they will help keep your air-conditioner functioning smoothly and prevent water dripping from the AC.

Buy Mygate smart locks

In continuation to our efforts in improving usability, increasing engagement, increasing collection, reducing the operational efforts, and supporting acquisition and retention in the system, we have identified and rectified the following product gaps and also added certain valuable enhancements to the product.

Advanced invoice Sequencing

Invoice sequence management is critical to functioning of any society wrt GST filing and ordered record keeping.

This new section consolidates the default and customizable sequences to make it easier to create, verify, call and avoid duplication mismatches in the system.

RCM Purchases

To improve the quality and credibility of expense accounting, we have introduced an option to book RCM purchases. Now, a GST registered society can book their non-GST vendor purchases automatically without worrying about passing vouchers. GST-3B is also auto-populated to ensure compliance during filing.

Mumbai fine – consolidation of fine (on PDF only)

To help managers and accountants with easy circulation of the bills, Mumbai fine entries can now be consolidated to a single line so as to accommodate invoice PDF in single page. The setting is made available under the site settings and society admins can turn this on.

Cash-bank voucher bulk upload in the admin dashboard

Now the admin users can bulk upload cash-bank vouchers from the Uploads & Downloads sections in the admin dashboard.

Account Statement – PDF Print

To help the users with downloading or sharing the accountant statement with residents we have introduced PDF printing in the account statement.

Account Statement – Ascending / descending sort

Now the users can sort the account statement in ascending or descending order of the date so that comparison with other statements is now made easy. This also improved the usability of the statement since the users can sort the latest transaction to the top rather than scrolling through.

Account Statement – Penalty to be segregated as per plan & to be added to due value

To improve the understandability of the account statement, we have segregated the penalty amounts as per the bill plans. Also the accumulated penalty is added to the total due value to ensure complete clearing of dues. 

Account Statement – Period Filter

Period filter is introduced to account statements so that users can now filter out the statement for a specific time period.  

Account Statement – House Filter with Owner Name

House filter with the owner name is introduced to the account statement. This enables easy redirection to a different flat from the account statement page rather than coming back to the dues page and redirecting. 

Forum – Supporting other document formats

The discussion forum is enhanced to support the following document formats as attachments. 

• xls
• PDF
• gif
• doc
• docx
• csv
• Xlsx

Forum – Improving Reply to a comment

Replies to a comment is now structured with the following changes

• The name of the person who is replying to the original message is displayed for reference.
• The original comment that is displayed while replying is having a reduced font size of 1 size less than the reply comment
• Truncated the original message displayed in replies to 2-3 lines.

Prepaid – Admin level setting for low balance alert

We have introduced an admin level setting for setting up the low balance alert in case of prepaid meters. This will automatically notify the user if their prepaid balance goes below Rs 500.

Prepaid – Mode of payment transfer for Elmeasure & Neptune

Now we have started displaying the mode of payment to above vendors for prepaid meter recharges. Showing the mode of payment helps accountants and managers in reconciling the recharges. 

MyGate

Surviving in Indian summer without an AC is a difficult task. With the rising temperature, this one appliance is necessary for our homes now. We all know that it maintains the temperature of the room or a specific area depending on the capacity, but how? Most of us use AC either at home or work, but how many of you know how AC works or what are the AC parts or functions? You might say, what is the need to know these technical things. If you know your appliances well, using them properly increases. Hence, the longevity and performance get better.

Let’s discuss the major components of an AC and how those air conditioners components work:

Compressor

The compressor is one of the main components of the AC. You can call it the heart of your air conditioner. The compressor converts gas to liquid. It converts a low-pressure gaseous refrigerant into a high-pressure, high-temperature gas from the evaporator. As a result of this procedure, the air conditioner can cool the warm air and maintain the temperature of your room. You might have noticed a 5 or 10 years warranty written on the AC; most of the time, this warranty is on the compressor.

Condenser coil

The condenser coil is connected to a fan. This fan cools the gas as it enters under high pressure, transforming it into liquid form, as previously stated. The condenser coil is one of the most important air conditioning system components, and it is located outside of the AC unit.

Evaporator

The liquid that exits the condenser coil passes through tiny pipes to the evaporator. The evaporator has extremely low pressure inside. This converts the liquid to a gaseous form. Once the gas cools down, it moves on to the next stage of the air conditioner.

Blowing unit and air handler

These two devices work together to pull heated air into the air conditioning unit and return cool air to the room in a cycle. The blowing unit and air handler are in charge of distributing cold air evenly across the space.

Thermostat

The thermostat assists the air conditioning system in maintaining the appropriate temperature. These various air conditioning parts will not function appropriately unless the AC is at the proper temperature inside. If your air conditioner isn’t cooling your home, it’s most likely due to a faulty thermostat. The thermostat is critical in controlling the temperature of the air conditioner.

Drain pipes

The drain pipes collect the water droplets that condensate when hot air cools down. The drain pipes transport the water droplets from the AC. Water will begin to leak from the air conditioning unit if the drain pipes fail or remain clogged.

Filters

This is one of the AC indoor unit parts. Every air conditioner includes a filter. The AC filter prevents dust and dirt from entering the main unit of the air conditioner. As a result, AC filters are integral components of an air conditioning system.

Knowing various parts of your AC helps you to maintain the air conditioner better. Some parts are easy to maintain and repair, like cleaning the filter or changing drain pipes. You can easily do it on your own if required. However, if you face any other issues, like AC not cooling properly, it is better to get it checked by a professional only. It is also recommended to get your AC servicing done on a regular basis. Here are a few things to keep in mind to maintain and use your AC in its the best condition:

• Get your AC installed by professionals only
• Do not delay in repairing if any issue occurs
• Avoid delay in scheduled maintenance
• Clean the air filters on a regular basis
• Keep the cooling unit clean

An air conditioner is a machine that relies on all of its parts to function properly. The compressor is dependent on the condenser coil, which is dependent on the evaporator, and so on. As a result, all the components of the air conditioner should be in good working order at all times. MyGate offers AC repair service, which can be booked online by downloading the MyGate app or calling us directly.

About MyGate

MyGate is India’s largest apartment management app, benefiting thousands of housing societies, developers, society facility managers, and millions of homeowners in every Indian city.

Buy Mygate smart locks

The Silicon Valley of India – Bangalore – is the third most popular destination in India. It is home to one of the busiest airports in the country; between April 2019 and March 2020, Kempegowda International Airport handled approximately 32,361,666 passengers. Cab services in Bangalore are aplenty and convenient. Cabs and taxis are the best way to traverse any corner of this sprawling city. There are numerous online airport taxi services in Bangalore. You can book cabs from Bangalore airport to reach other towns in Karnataka. Cabs are the safest and most convenient way to travel within and outside Banglore from the airport.

Several high-rated automobile rental services are available. You may select a taxi based on your budget and travel requirements. If you hire a car online, you may enjoy everything from scheduled pick-ups and drop-offs to skilled chauffeurs and sophisticated navigation.

Benefits of an airport taxi service in Bangalore

• Lowest Airport Taxi Fares – You can get the cheapest fares by availing the Airport Taxi service in Bangalore.
• Book a Cab in Advance – You may book a taxi in advance with any of the airport taxi services. You will receive prompt service, with the taxi arriving at your pick-up destination on time.
• No Surge Fare Airport Taxi – There are no surcharges at any time or location. Pay for the distance between the airport and your home.
• Professional and Reliable Airport Taxi Drivers – The drivers are well-behaved, polite and professional.
• Well-maintained Cars – Clean and modern cars for a better travel experience.
• Customer service is available 24/7 for the airport cab service.

For a flawless airport travel experience, you can count on best-in-class customer service!

Cancellation details for airport cab services

If you cancel your reservation:
The passenger must notify us as soon as possible to minimise the inconvenience and expense to all parties concerned. Use any of these methods to get in touch with customer support:

• Email
• Phone call

Importantly, if a return trip was scheduled as part of the same booking, cancelling the onward journey would automatically cancel the return trip, unless otherwise specified.

Inclusive services

• Journeys entered from a given pick-up location to a specified destination.
• Pick-ups at the specified time. (When entering a pick-up time, make sure you allow enough time to get to your destination and check-in procedures in the case of airports.)
• Space for 3 passengers in hatchbacks and 5 passengers in SUVs is provided.
• When the pick-up location is an airport, meet and greet service is available 30 minutes after your flight has arrived, with a maximum wait period of 45 minutes.
• If mentioned, return travel.
• The number of baggage items stated in your booking request will be transported.

Exclusive services

• Outside the meet and greet service, there is no waiting period. If you have such a request, please inform us ahead of time to prevent any additional fees.
• Detours from the route specified.
• More passengers than indicated at the time of booking.
• Oversized and excess baggage (see Luggage section).
• Cleaning costs incurred as a result of passenger fouling.
• Parking beyond the meet and greet
• Any additional road fees.
• Additional costs for the products listed above must be paid directly to the driver.

Pricing for airport cab services

The following table depicts the approximate pricing for hatchbacks or SUVs for airport cab service, including taxes and parking.

Number of kilometres	Hatchback	SUV	Taxes + Parking
Upto 20 km	Approx. ₹500	Approx. ₹700	Approx. ₹95
Upto 30 km	Approx. ₹650	Approx. ₹1,000	Approx. ₹95
Upto 40 km	Approx. ₹850	Approx. ₹1,200	Approx. ₹95
Upto 50 km	Approx. ₹1,100	Approx. ₹1,500	Approx. ₹95

Conclusion

Bangalore, the capital of Karnataka, is one of India’s most populated cities. It goes by numerous epithets, including ‘IT City’ and ‘Garden City’. Although primarily a job hub for the IT sector, it has its share of tourist attractions. The prominent ones include the stately Vidhana Soudha – the seat of the state’s governance, Lal Bagh and Cubbon Park – the verdant lung spaces within the city, and numerous temples in and around the city.

Getting around Bengaluru has never been easier. The process of hiring a cab online is straightforward. Go to the website and enter your ride information. With a list of taxi alternatives, you may pay for and book your airport taxi in Bangalore. The cabs are thoroughly cleaned after each trip. Furthermore, masks must be worn by the drivers, employees, and passengers throughout the ride. Make your next trip to Bangalore as pleasant as possible; book your airport taxi service today!

FAQs

Home Services

Have you spilled your drink on the couch? Did you drop a spoon on your favorite t-shirt while enjoying some soup? The immediate thought is how to remove that stain. We all have been there. You might run to the store and buy a potent and harsh chemical that will perhaps remove the stain but which may be harmful and damage the thing on which it is applied. What if we tell you that something natural can work as miraculously on stains as any chemical would? This natural alternative is one of the most common household items. We are sure you have eaten it too in your favorite dessert.

No, this is not a trick. We are talking about baking soda which is available at home. Baking soda or sodium bicarbonate is a versatile item. It is a cleaning agent, deodorizer, buffering and leavening agent, and a fire extinguisher. It is the most inexpensive, gentle, non-toxic method of getting rid of horrid stains from clothes, upholstery, tiles, and other surfaces.

Stains are inevitable. You will have a laundry disaster at one point or the other. This article aims to teach you how to remove nasty stains so that you don’t have to lose that favorite dress because of a stain. The key to any stain removal is to pre-treat. Washing the cloth with detergent is not always enough. Therefore, pre-treat your fabric as soon as it gets stained. This will make the entire process faster and smoother.

The ABCs of stain removal

These are quite literally the ABCs of stain removal. Once you learn these, you will become a master at treating stains.

1. Act

Stains are dangerous. But what is riskier than that? It is not treating or acting on them as soon as possible. Fresh stains are easy to treat and remove. The more it stays on the cloth, the more it sets and becomes a permanent stain. So, pre-treat the fabric right away.

2. Beware

Stain removers are meant for stains, but they can often bleach the color of the cloth itself. To prevent such a laundry massacre, always test the color fastness of the fabric. Some fabric dyes bleed with every wash. You have to be extra cautious while removing stains from such sources. Baking soda is a gentle cleanser but it too can strip off the dye depending on the fabric.

3. Check

After you pre-treat the stain, wash it with regular detergent. Here comes the crucial step. Before you put it in the dryer, thoroughly check for any remnants of the stain. Because once it is dried with heat, any remaining spot will become a permanent embellishment. If you aren’t satisfied with what you see after washing, pre-treat and wash again.

How to pre-treat various stains?

Baking soda is a powerful cleaner and can remove even the toughest stains. A baking soda paste is made to pre-treat stains. Baking soda and water (warm water) are mixed in a ratio of 2:1 to get the desired consistency. Of course, this can be tweaked according to the material and the toughness of the stain. Apply this paste generously on the spot you want to treat and wait for some time before you wash it. The baking soda paste traps and breaks down the stain and removes it. You can also directly spread baking soda on some spots instead of applying the paste.

1. Sweat stains

Sweat stains on the back, collars of the shirt, or in and around the armpit area can become a nuisance. It looks ugly and smells horrible. To banish these sweat marks, apply the baking soda paste and leave it one for an hour or two. Once it dries, brush it off and wash it. This paste looks after not only the stain but also removes the odor.

2. Blood stains

Blood stains can become a nightmare if not treated immediately. Soak the cloth in a bucket of cold water before you apply the baking soda paste. Leave on the paste for at least an hour before washing it off. Baking soda will dissolve and lift the blood stain gently off the cloth.

3. Sauce stains

We know that spilling sauce on your dress while eating noodles is the last thing anyone wants. Do not fret. We have got you covered. Have you ever seen stains on chef coats? No, right? They are impeccably white. They are toiling in the kitchen for hours and spill so many sauces and whatnot on their coats. Then what is the secret behind the whiteness of their coats? Baking soda. For a white fabric, you can soak it in a tub of water with some detergent, a cup of baking soda, and a fabric brightener. Once they are well-soaked, remove the clothes and wash them.

4. Wine stains

Wine and fruit stains can be the worst if not tended to immediately. Pour baking soda directly on the stain and let it sit. The baking powder will break down the stain molecules, absorb any excess liquid and prevent it from leaching into the surrounding areas. Later on, run warm water through the back of the stain. This is a miraculous way of removing wine stains from fabrics.

5. Odorous stains

Some stains, like sweat stains, have a terrible odor. You might have seen often, after treating and removing the spot, the smell lingers that can be off-putting. Unlike any other stain remover, baking soda does not mask the smell but neutralizes it. Therefore, baking soda is a very popular stain remover plus deodorizer. For smelly stains, opt for baking soda. You can spread it on the cloth, which will soak up the moisture and remove the odor. Or you can rub a paste of baking soda on it, which will remove both the stain and the smell.

6. Vomit stains

New mothers can relate to obstinate vomit stains. They will ruin the clothes and upholstery, and these stains also have a nasty lingering odor. But how do you tend to the stains when everything else is in chaos? If you can’t wash off the spots immediately, sprinkle baking soda right away on the site. Once you have got a hold on the rest of the things, tend to the stain. Rub the baking soda into the fabric and then wash it off. This will tackle both the spots and the rancid odor.

7. Grease stains

If there’s anything terrible than wine stains, it has to be grease stains. They not only leave marks, but it forms a weird sticky lamination on the surface of the cloth that will not budge, no matter what detergent you use. But baking soda is such a unique substance that it can even break down grease molecules and lift them. Pour baking soda on the site and let it rest for about an hour. Then take a toothbrush, rub it on the spot and wash it off. If there’s an oily film left, you can add some vinegar to it to instantly remove any remaining greasiness.

Conclusion

One thing is clear: baking soda is an all-rounder. So, if you have got baking soda at home, you need not worry about stains. The stain removal capacity of baking soda is not limited to fabrics; it can also remove water marks and stains from tiles, faucets, and showers. Because of its whitening properties, baking soda is also used in dentistry to remove stains from teeth enamel.

So, sip that wine while sitting on your couch, play with paint with your kids, and let your kids jump into that mud puddle when it rains. These moments are what you will cherish forever. Remember with baking soda, any stain is temporary!