Do you know which is the most important room in your house? No, it’s not your bedroom or your living room. It’s the bathroom! Surprised? This place has the potential to become your spa and help you relax and unwind. Unfortunately, this is the one area that collects a lot of dirt and germs, making it the most unhygienic place if not taken care of.

A hurdle you might face when trying to clean your bathroom is the stubborn stain on your tiles. How can you get rid of stains on bathroom tiles? It depends on the type of stain and what material is used to get it off. Before you start thinking about getting professional help, look around your house. You already have everything you need to get rid of stains on your bathroom tiles.

But first, it’s important to understand the type of stains you might find in your bathroom. It depends on two factors. One is the tile’smaterial, and the second is the type of mineral found in the water that causes stains. Usually, everyone uses ceramic tiles in their bathrooms, and some harsh chemicals can cause surface-level damage.

• Iron deposits can cause reddish-brown stains.
• Yellow stains are created when human oils accumulate in an area.
• Rust-coloured and blue-green coloured stains are due to low pH or acidic water.
• Sulphur bacteria can cause black stains.

Now let’s look at a list of materials found in your home that will work as floor stain cleaners:

• White vinegar
• Baking soda
• Hydrogen peroxide
• Dry abrasive cleaner
• Common salt

1. White vinegar

Yellow stains can be easily removed with white vinegar. It is a soft cleaning agent that doesn’t damage or scar your bathroom tiles. You can use it on any kind of delicate material. Just fill a spray bottle with white vinegar and spray it generously over the stained area. Now, wait for 20 minutes, and then use a sponge to wipe away the stain. After wiping the vinegar from the tiles, rinse the tiles’ surface with warm water.

2. Hydrogen peroxide and baking soda

Baking soda, also known as brightening powder, combined with hydrogen peroxide can remove the toughest of black or red stains. Mix two parts of baking soda with one part of hydrogen peroxide to form a paste. Apply this paste on the stain and wait for 30 minutes. After half an hour, scrub the surface with a sponge or a nylon brush to remove the stain. Then, rinse the area with clean, warm water. If the stain persists, repeat the procedure until you get a clean surface. This mixture can cause scars on delicate materials, so do not use it on any kind of acrylic or plastic surface.

3. Dry abrasive cleaner

To remove rust-coloured or blue-green coloured stains, you can use a dry abrasive cleaner with an eraser or a melamine sponge. Make a thick paste with equal parts of the cleanser powder, or the dry abrasive powder, and water. Now apply this paste to the stain and wait for about 10 minutes. After the paste dries, dampen the area with an eraser sponge and hot water, and scrub it. Then, rinse it with hot water. If the stain persists, repeat the procedure until you get satisfactory results. The abrasive cleaner can be harsh on delicate materials, so be sure to use it on a tough surface.

4. Common salt

It helps remove stubborn hard water stains from your bathroom tiles. Along with being a cleaner, it is also a great disinfectant as it kills the germs present in the bathroom. First, make sure that the bathroom floor is wet. Then sprinkle the common salt on the floor and leave it for half an hour or more. The longer the common salt remains on the bathroom tiles, the easier your job will be. Scrub off this salt with the use of a sponge or a brush. You will find the bathroom stains gone.

5. DIY floor stain cleaner

Bathrooms can be made inviting by regular cleaning and using a shower spray. A daily shower spray is the do-it-yourself version of a floor stain cleaner or a bathroom cleaner. You need one part white vinegar and three parts water. Mix them well to make a floor stain cleaner. Fill it up in a spray bottle so that it is easy to use. Now spray this mixture liberally over the surface of the bathroom tiles after each use, or spray it periodically. It will prevent buildup and stains. Your bathroom will always stay stain free.

Removing hard stains from your bathroom tiles is a tough job. You should take the necessary precautions before you start cleaning the tiles. Be sure to wear gloves, keep the area well ventilated, and read labels of all the materials or floor stain cleaners that you use. Do not forget to conduct a patch test on a small area of the tile that you will clean. To make your job easier, try installing a water softener in your bathroom. This will increase the durability of the appliances and minimise the chances of tile stains.

Bathroom cleaning is probably not at the top of anyone’s to-do list. We must, however, clean it, as a dirty bathroom and bathroom tiles are home to multiple disease-causing germs. A strong mold layer of dirt may appear on the tiles, if they are not properly cleaned. Therefore, cleaning tiles either on the floor or the walls of your bathroom is crucial and must be done on a regular basis.

How to clean bathroom floor tiles and wall tiles is a question that most people have. You can save a lot of time and work if you learn how to clean bathroom tiles effectively. This article provides a step-by-step guide on cleaning bathroom floors and wall tiles, ways to deal with mold that develops in between tiles, and a few tips on keeping bathroom tiles clean.

Importance of cleaning bathroom tiles

Before we get into the methods for cleaning bathroom tiles, it’s crucial to understand the significance of a clean bathroom and neat bathroom tiles. Cleaning your bathroom on a regular basis may provide you and your family with more than just a clean and odor-free environment.

• Dirty bathroom wall tiles and floor tiles can be dangerous. If there is a mold layer on the tiles, you are more likely to slip and fall. Similar to algae, these black layers in the grout of the tiles are very slippery. They can also result in a sudden fall, which can therefore lead to problems like slip disks, fractures, etc.
• The mold layer on unclean bathroom tiles attracts a number of insects. They can also bring a lot of germs with them, making the bathroom unhealthy for people, especially babies. If you don’t clean the bathroom tiles, the layer of untidy mold will continue to grow, resulting in germs all over the wall tiles too.
• Another issue with dirty bathroom tiles is that they can welcome unwanted guests like bacteria, viruses, and fungi, resulting in serious health problems like Norovirus, Salmonella bacteria, influenza, shigella bacterial diseases, etc. These are highly dangerous diseases that may lead to permanent health problems.
• After a long day at school, college, or work, anyone would love to take a bath or freshen up. A clean and neat bathroom and tiles may instantly lift your spirits, and help you conclude your day on a positive note.

Now, let’s look at different ways to clean bathroom wall tiles and floor tiles, as well as explore the best “How to clean bathroom tiles?” step-by-step guide.

How to clean bathroom tiles?

There are many ways to clean bathroom tiles. However, let us start with the most simple Do It Yourself (DIY) approach, which everyone can easily use at home.

Basic DIY methods

These methods can be used for regular cleaning of bathroom tiles or to remove new mold layers.

• Use Vinegar: Vinegar is a good bathroom tile cleaner and can also be used to remove yellow spots on tiles. A tile-cleaning agent can be made by mixing equal parts of water and white vinegar. After creating the mixture, spray it over the bathroom tiles and use a cloth to wipe the tiles.
• Apply Lemon Juice: As lemon juice is slightly acidic in nature, it works well as a bathroom tile cleaner. Fill a spray bottle halfway with lemon juice and squirt it immediately onto the tile surface, wiping it away with a sponge. Alternately, use a sponge with lemon juice and use it to wipe down the tile. After that, clean the tile with a warm water-soaked cloth.
• Cleaning Products: There are many all-purpose cleaning products available in the market that will efficiently clean your bathroom tiles. The particular application instructions vary for each product. You may generally begin by lightly spraying the bathroom tile with the cleaning spray, and then using a clean cloth to wipe the tiles. Cleaning chemicals that are available in powder form may need to be combined with water before use.

Heavy-duty tile cleaning

This method of cleaning should be used to remove hard stains and mold layers from the bathroom tiles. Unlike the basic DIY method, it should be used once or twice a week.

• Baking Soda: To make an effective tile cleaning solution, combine baking soda, liquid cleaning product, and hydrogen peroxide. Fill a spray bottle halfway with the mixture and spray it on the bathroom tiles. After a few minutes, use a sponge or cloth to wipe the bathroom tiles clean. This process should be used once or twice a week.
• Bleach: A tile-cleaning solution can be made by mixing bleach and water in a 1:3 ratio. You may, for example, combine fifteen tablespoons of water with five tablespoons of bleach. Now, spray the mixture and use it to clean the bathroom tiles. Clean the tiles with a moist cloth dipped in warm water. Even though this is a fantastic tile cleaning procedure, use caution because the bleach might irritate your hands.
• Steam Cleaner: It is a cleaning machine that cleans bathroom tiles using steam. Steam cleaners work just like vacuum cleaners to clean dirt. To use the machine, simply switch it on and push it along the bathroom tiles. The water inside the steam cleaner boils and produces steam, allowing you to clean hard mould layers. As it is a costly cleaning method, look for places to rent a steam cleaner.

Professional bathroom cleaning services

DIY methods can be employed to keep bathroom tiles clean on a regular basis, but everyone should schedule a professional bathroom cleaning service at least once a month to properly clean the bathroom and shine the bathroom tiles. There are various benefits of hiring expert bathroom cleaning service providers, including the following:

• While it may take days to persuade yourself to clean your bathroom tiles, followed by hours of bathroom cleaning, a bathroom cleaning services professional can complete the task in minutes with amazing efficiency, leaving your bathroom tiles shining like new.
• You may ask a random house helper to clean the bathroom, but the issue of security may arise. Professional bathroom cleaning service providers have a full database of verified home helpers, whose details are sent to you while booking. Thus professional bathroom cleaning is both safer and more efficient. To make it safer, you may install the MyGate Apartment Security system that makes sure that only verified helpers enter the residence to clean your bathroom after a thorough security check.
• Bathroom tile cleaning takes a lot of time, which is why professional bathroom cleaning should be utilised. Certified bathroom helpers will clean the bathroom and shine the bathroom tiles, allowing you to work, while they clean the bathroom and shine the bathroom tiles.
• Bathroom cleaning agencies have access to costly cleaning equipment like steam cleaners and tile polishing machines. They can thus help you better clean your bathroom wall and floor tiles.

You can book professional bathroom cleaning services using online websites or applications like UrbanClap, HiCare, and many more. Build the in-app profile in a few clicks and verify details to book bathroom tile cleaning services.

How to clean bathroom wall tiles?

Black molds normally originate at the vertex of the two wall tiles, which is very difficult to reach without a suitable bathroom cleaning process, making it more difficult to clean wall tiles than bathroom floor tiles.

• Use Baking Soda: In a mixing bowl, combine equal parts baking soda and water. For example, three teaspoons of water and three tablespoons of baking soda could be used. Wipe the paste onto the vertices of the wall tiles with a brush. Use a sponge or cloth to apply the paste into the grout, then wipe it away. This will help in cleaning bathroom wall tiles.
• Using Cotton: It can be tough to clean corner tiles with a standard brush or sponge. Instead, dip a cotton ball in the tile cleanser and gently press it into the dirty corner, and then remove the cotton ball after a few minutes. To eliminate any additional unwanted substance, wipe the corner with a cloth. You might also scrub the corner tiles with an old toothbrush to clean them effectively.

Conclusion

One needs to follow no set time interval to clean bathroom tiles. Depending on the tile’s durability, it may only need to be cleaned four times each year or once a month. Keep a watch on your bathroom tile and clean it as soon as soap stains, yellow patches, or other mold layers appear. If you don’t have enough time to clean your bathroom tiles, hire a professional bathroom tile cleaner to do it for you. It’s also safe because only verified helpers are sent. Install the MyGate Apartment Security system to boost security, which ensures that only verified workers enter the house following a rigorous security check to clean your bathroom tiles.

How To Clean Bathroom Tiles Home Remedies

How to clean marble floor in bathroom

How to Clean Bathroom Drains

About MyGate

MyGate is India’s largest apartment maintenance software, benefiting thousands of housing societies, developers, society facility managers, and millions of homeowners in every Indian city.

Home Services

Bathroom floors sadly get overlooked and do not get the same maintenance that other areas of the house usually do. This can often lead to mould and grout deposits on our bathroom tiles making the whole bathroom look dull, unhygienic, and can also lead to weaker fundamental construction as fungus and bacteria seep deeper into your cement. So, if you too are suffering from dirty bathroom tiles, then this article is going to tell you how to clean your bathroom tiles with home remedies.

However, before we tell you how to clean bathroom floor tiles, it is essential to understand what causes the staining and discolouration. Years of exposure to bleach, strong disinfectants, cleansing acids, water, soap residue, and in general, the negligence of the bathroom floor are the main culprits. Now that we know the problem, we would reasonably find that the solution lies in cleaning agents, and people often look towards bleach when it comes to cleaning tiles. However, bleaches don’t just provide a temporary solution, they also end up degrading the strength of your bathroom floor. It is therefore important to look for more home-based solutions.

Here’s how to clean bathroom tiles using home remedies

Baking soda

Baking soda is a natural cleansing agent and is found in most kitchens. But did you know it could work a charm on your bathroom floors as well? All you need for this method is a tablespoon of baking soda, liquid dish soap, white vinegar, a damp sponge, and some hot water. You need to gently dip the sponge in the mixture and squeeze the residual out of it before you start scrubbing the scum off your tiles. This method works wonderfully, and you should make this a regular part of your bathroom cleaning rituals.

Salt

It is another common household ingredient that is probably even more common than baking soda. You could find a kitchen that doesn’t have baking soda, but you’re not likely to find any kitchen anywhere that doesn’t have common salt. All you have to do is prepare a solution of hot water and mix more salt in it than it can dissolve. Or you could simply sprinkle the salt over moist bathroom tiles and scrub aggressively. However, this would require some effort from you, but the results will be nice and mild. This remedy works wonderfully if your bathroom tiles are not grossly stained and you do daily clean-ups.

Lemon juice

Lemons are natural bleaches and rich in acidic content, which works great against stains that just won’t go. Moreover, lemons aren’t exactly common allergens, which means the aroma or contact with lemon will not cause you any harm. All you have to do is regularly sprinkle lemon juice onto your bathroom tiles. You can do this once every week for effective cleanup. Keep in mind that the residual of lemon juice can be sticky and you should wash it off after 2-3 hours.

Borax

Borax is a naturally occurring alkaline substance with a very high pH value. It means that it can disinfect and remove stains while also providing a stable balanced neutral ground where fungus and acidic stains do not blossom. All you have to do is make a solution of hot water and Borax and dip your porous sponge into the solution. Then you just have to scrub and clean your bathroom floor using the wet dampened sponge.

Vinegar

There’s a reason why vinegar is used as a natural preservative. It not only keeps infectants away, but it also helps in cleaning the composition that it is used on. You can use the same formula in your bathrooms. All you need to do is mix vinegar with either hydrogen peroxide or common salt and take out the soap scum that has been deposited on your bathroom tiles.

Hydrogen peroxide

Most families keep a bottle of hydrogen peroxide around because it is usually used to sanitise wounds and deep cuts. However, in this case, we’re going to use hydrogen peroxide in the form of a bleach. Yes! Did you know that hydrogen peroxide is known to whiten floors and prevent fungal growth? So, if you have white bathroom tiles that are now covered in layers of oil and mould, use a solution of hydrogen peroxide alone, or mix it with lemon juice to increase its effectiveness.

You could also make a thick paste by mixing some corn flour or regular flour into this magical compound and then apply it to your bathroom tiles. Make sure to put extra coats in the areas with more deposits and leave them overnight. You can also cover it with plastic to ensure that the harsh chemicals do not get on the feet of your children or your pets. You can take it off the next morning and wash it off with warm water.

Using the right tool

As you can see, in most of the cases we’ve used a sponge. However, in some cases, you may have to make use of a toothbrush or a longer brush. In other cases, a simple cotton cloth will be fine. How to determine which goes on what? The best way to do so is by hit and trial. If you’re dealing with stains of smaller sizes, then you should look for brushes, and if you’re dealing with bigger and larger areas of deposits then sponges can do the job. However, this may not always be the case. You can start the cleaning process with a sponge and then move over to a cloth to wipe the area dry, and you can then remove the remaining deposits with the help of a brush.

Although all of these ingredients are natural and are known to not harm the skin, it is advised that you wear protective gear while using these compounds. Your hand should be covered in gloves and your eyes should be covered in goggles. Also, while you are using these chemicals, make sure not to touch your skin even with the gloves on. In case you are making use of stronger compounds like vinegar, it is advisable not to enter the premises for 3 to 6 hours because the fumes can be allergic for some and may even cause nausea.

Please bear in mind that most of these solutions can be intermixed and inter-used. You can also swap between different ideas to observe which one works the best in your case. However, even after applying all these home remedies you do not see any major change, then it may be time to get professionals involved. One more appliance that you can bring to your home, which is not really a home remedy, is a steamer. A steamer is an appliance that ejects high-pressure hot steam that can effectively take out any stubborn mould/ grout.

Before resorting to any harsh chemicals, it is always advised that you try removing dirt and grime using the home remedies listed above. Have a good time cleaning; and if you need our expert services, do reach out to us in the comments below.

How to clean marble floor in bathroom

How to Clean Bathroom Drains

How to clean bathroom taps

About MyGate

MyGate is India’s largest apartment maintenance app, benefiting thousands of housing societies, developers, society facility managers, and millions of homeowners in every Indian city.

Home Services

Cleaning is a vital aspect of maintaining a healthy house. It involves preventing and controlling germs, viruses, and other pests such as moths, dander, and bedbugs, which can cause damage if not dealt with promptly.
Viral strains such as Delta and Omicron that are known to cause Covid can survive for days on various surfaces in your house. Therefore, during the Covid-19 outbreak, proper cleaning is essential, and everyone should know ways to sanitise their house.

From vacuum cleaners to IoT based smart cleaners, humanity has gone a long way in terms of the evolution of indoor places. Many contemporary conveniences are taken for granted, yet some can introduce dangerous chemicals, pathogens, and safety hazards into the house. Make and maintain your home a secure refuge by taking a few additional measures.

Home sanitisation after Covid is crucial because the coronavirus may live on rugs, mats, and other fabrics for several hours. Although you are unlikely to contract the virus from these sources, if you step on a contaminated carpet or rug and visit other rooms in your house, the virus can spread throughout your home. It is therefore essential to know how to sanitise rooms after home isolation.

Fortunately, you can easily remove the viral material from these surfaces with simple disinfectants and cleaning processes. Continue reading to learn about specific typical household problems and how to keep your living areas safe and healthy.

You need to regularly shake out your carpets and steam clean the mats as much as possible. Opening all windows for a few days provides for adequate ventilation and, to some extent, aids in the removal of the virus. An air purifier may also capture any infectious respiratory droplets.

After cleaning the slabs with soap and water, sterilise them with bleach. This extra procedure will be helpful in the elimination of any remaining infections. It only takes a teaspoon of household bleach per litre of water to get the job done.

Dust is a toxic mixture of chemicals from perfumes, cleaning goods, personal care items, and even the materials used to construct your home. Nowadays, we have the convenience of restrooms and bathtubs, but germs may hide in unexpected places.

Using chlorine bleach to eliminate any viral material linked to Covid-19 is also a good idea. You can also use ammonia. However, you need to be cautious; never mix bleach and ammonia since this might result in dangerous compounds.

People are grappling with getting the necessities done while keeping their family members safe and healthy, and mundane domestic duties have transformed into a source of worry and anxiety. Well, sanitising once with the proper disinfectant is effective and successful in keeping the Covid-19 at bay, then vigorous cleaning the house.

To assist the readers, we assembled the most up-to-date relevant information on everything available about COVID-19 and prevention methods. This article breaks down how to disinfect a room in places and residences where people have been isolated after contracting COVID-19 or have been quarantined due to possible exposure to an infected individual.

If the label on your disinfectant product doesn’t specify, it may be applied for both disinfection and cleaning. Clean noticeably unclean surfaces with detergent and water before disinfecting.

The Ministry of Health and Family Welfare guideline for disinfecting homes states that to clean delicate surfaces like carpets, rugs, and curtains, follow the manufacturer’s instructions. If necessary, wash them in your laundry at the hottest water temperature that the item allows. It covers everything about how to sanitise a room after Covid.

MOHFW Annexure I for preparation of 1% sodium hypochlorite solution. This is done after cleaning and can help reduce the chance of infection spreading. It is to eliminate germs from surfaces. Annexure-II is for hand hygiene, and Annexure-III is mask usage guidelines.

How to disinfect your home

Make sure you wash and disinfect your laundry hampers just like any other hard surface. Linens, clothes, and other soft objects washed in the washing machine could still be cleaned this way. Do not shake soiled clothing since the active coronavirus might spread through the air. Again, follow specific laundry instructions and use the hottest water feasible. It’s okay to use regular washing detergent.

First, wipe visible dirt and other pollutants from electronic devices such as mobiles, pads, touch screens, remote devices, and computers. The CDC recommends that you follow the manufacturer’s directions for all disinfection and sanitising products. If you can’t locate such instructions, you should disinfect touch displays with alcohol-based wash or solutions that contain at least 70% alcohol. Thoroughly dry all surfaces.

Personal hygiene:

• The cleaning crew should use disposable gloves and gowns during the cleaning procedure.
• Disinfectant products should be suitable with the gloves and gowns used.
• If necessary, use extra protection based on the items being utilised.
• To avoid infecting the surrounding environment or the person wearing them, mittens and robes should be appropriately removed. After removing the gloves, wash your hands thoroughly.
• Clothes should be removed after disinfecting a room or area polluted by an unwell person. After removing the gloves, immediately wash your hands.
• If your gloves or PPE rip, notify your supervisor immediately to avoid exposure.
• Everyone, including cleaning personnel, should wash hands with soap and water for 20 to 30 seconds.
• Cleansing hands and avoiding touching your face are standard precautions to take at work and home. After sneezing or coughing, you should rewash your hands.
• Also, wash your hands after you’ve used the restroom, before you consume or prepare food, after having come into contact with pets, before or after offering regular support to another individual in need.

How to sanitize home by self

The CDC suggests the following measures for cleaning a floor and sanitising a home by yourself:

• Prepare three buckets: one for plain water, one for warm water with detergent solution, and one for sodium hypochlorite 1 % solution.
• Using warm water and a detergent solution, mop the floor area.
• Don’t pour water straight onto the floor; instead, use it sparingly.
• Plain water should be used to clean the mop.
• Repeat these steps all over the floor.
• Mop the area with sodium hypochlorite (1%) once it has dried.
• The mop should be cleaned with detergent and hot water, then disinfected with sodium hypochlorite.
• It should be dried upside down.
• To clean the sink, use a powder cleaner. If the sink is dry, remember to moisten it first.
• Use soap and a moist cloth to clean lights and switches, not a wet one.
• It is ideal if the sick individual uses a separate toilet.
• Using standard home bleach or phenolic disinfectants, sanitise toilet surfaces daily.
• Scrub the toilet floor using a scrub brush and soap powder. Sodium hypochlorite (1%) can be used to disinfect.
• Personal trash, such as used wipes, packaging, and masks, should be placed in disposable garbage bags in the same room as the individual in isolation or quarantine.

Be careful while sharing a bathroom:

If you have to use a washroom with someone who has COVID-19, make sure you’re protected. After an individual with COVID-19 uses it, take as much time as you can before using the restroom. When using the toilet, use a mask. Clean and disinfect the bathroom before using it.

When doing the dishes, keep yourself safe:

• When dealing with someone who has COVID-19, use gloves.
• When dealing with someone who has COVID-19, use a mask.
• When at all feasible, use a dishwasher.
• When washing the dishes, use gloves.
• When cleaning the dishes, use soapy hot water.
• When you’re done, remove the gloves.
• After removing the gloves, wash your hands.
• For 20 seconds, rinse thoroughly with soap and water.

Hygiene tips while doing your laundry:

• When doing laundry for someone with COVID-19, use gloves.
• Do the washing for someone who has COVID-19 while wearing a mask.
• When possible, use a washing machine.
• When feasible, use hot or warm water.
• Completely dry the clothes.
• Clean the basket in which you keep your soiled clothing.
• When you’re done, remove the gloves.
• Throw them away after removal.
• After disposing of the gloves, wash your hands with soap and water for 20 seconds.

About MyGate

MyGate is India’s largest app for apartment management, benefiting thousands of housing societies, developers, society facility managers, and millions of homeowners in every Indian city.

COVID

Drains are an essential part of any bathroom plan. They provide an outlet to the excess water in the bathroom and help it dry up quickly. But as helpful as they are, it’s also not an easy task to maintain bathroom drains. Just a little carelessness and your bathroom drains can get clogged. That’s as close to an earthly nightmare as you can get. And it’s far more common in a household than it looks, that’s why everyone should know how to clean the bathroom drain.

In this article, we’ll cover different ways to clean clogged bathroom drains easily. Moreover, we have also mentioned how you can prevent the clogging of bathroom drains. That should cover the basics of bathroom maintenance for you.

Why you should clean bathroom drains regularly

To some, it’s a question of cleanliness and hygiene. To others, it’s also about cost-effectiveness and general maintenance. There are numerous reasons why you should clean your bathroom drains regularly. First of all, bathroom drains can get clogged up if not cleaned regularly. That results in a foul smell and an open breeding ground for germs. Second, cleaning your bathroom drain regularly will increase its lifespan by reducing any damage. Regular cleaning also helps detect early plumbing issues like damaged pipes. This will help you save money on costly drain repairs. That sums up why you should learn how to clean bathroom sinks.

How to clean clogged bathroom drains

Before we tell you how to clean a bathroom sink drain trap, let’s first discuss some preparatory steps. First, remove the drain cover carefully and place it aside. Next, loosen and pull out the clean-out plug from the drain. Now, wear a pair of gloves (and an eyeshield if you are working with chemicals).

That’s it! Let’s learn different ways to clean a clogged bathroom drain:

1. Get chemical drain cleaners

If you want a quick and easy way out, you can rely on chemical drain cleaners to unclog your drain. Such cleaners have active chemicals that will instantly melt the sludge in the drain and clear the way out. Read the instructions on the cleaner carefully and be cautious while using such substances. Also, do a patch test on your floor tiles before using any chemical. This will avoid any further damage in case the cleaner is not compatible. Once your drain is unclogged, you can wipe the area around the drain to clean residues and germs. Don’t forget to use a disinfectant in the drain to prevent bacteria build-up.

2. Use a drain snake

A drain snake, also commonly known as a toilet auger, is a device often used by plumbers to unclog drains. You can get one online easily. To clean the drain, just push the snake down and crank its handle. When you feel some resistance against the snake, you’ve hit the sludge. Now slowly rotate the handle some more till the resistance goes away. Then you can carefully pull out the snake with the sludge. Clean the drain and the floor around with a disinfectant.

3. Use baking soda

Baking soda works great when paired with some other ingredients to unclog the drains. Since it’s a base, it helps clean sludge and stains easily. You can use baking soda with either salt or vinegar. Mix salt and soda in a 50:50 ratio to form 4 tablespoons of the mixture. Put the mixture in the drain and wait. Now pour some 4-5 cups of steam-hot water down the drain. The drain will clear out.

Alternatively, you can first pour 1 cup of baking soda into the sink, followed by 2 cups of steam-hot water. After 5 minutes, pour a cup of vinegar down the drain. This will clear out the drain instantly.

4. Use a plunger

A plunger works extremely well for minor blockages. It is also relatively easier to use than other devices and chemicals. First, you have to pour 1-2 cups of hot water into the clogged drain. Now carefully push the plunger into the drain. Keep pulling and pushing it down with great force for 30-40 seconds. The hot water helps in loosening up the sludge while the plunger removes it from the pipe. You will need to clear out the clog manually after this.

5. Use a vacuum

Vacuum easily unclogs the drain with intense suction pressure. To do so, you have to set the vacuum cleaner on the highest liquid setting. Next, attach a small seal to the hose to clear the blockage. Once done, turn the vacuum on to agitate the blockage. The sludge is likely to come out directly into the vacuum. If it doesn’t, it will at least be loosened so you can pull it out manually.

How to prevent clogging of bathroom drains

Now that you’ve learned how to clean the bathroom drain, it’s important to maintain them for as long as you can. Here are some preventive measures you can take to keep your bathroom drains running smoothly:

• Avoid the accumulation of solid things around the drain like hair, tissues, soap particles, etc. Check the drain stoppers from time to time for any such accumulation.
• Buy a good drain screen to prevent solid particles from going down the drain.
• You should run steam-hot water down the bathroom drains at least twice a week to clear any buildup in the pipe.
• Avoid using any invasive OTC cleaning substances with hard chemicals down the drain. This may damage your drain pipes over time, further aggravating the issue.

You can avoid any major issues with your drains just by taking these precautions and cleaning your drains yourself regularly. If not maintained well, such small issues can snowball into big hazards like health issues, damaged drainage systems, and severe blockages.

Conclusion

That’s a wrap on how to clean the bathroom drain! Remember to prioritize prevention over cleaning. It will increase the lifespan of your drains significantly and give you some more time of peace. Although you can clean a drain yourself, don’t hold back from seeking professional help whenever needed.

Running a modern home without gadgets and appliances can be unimaginable and time-consuming. In today’s modern world, we rely too much on appliances and gadgets in our homes and offices. Whether it is an AC or a refrigerator, our appliances regularly need maintenance and repair services. With the advent of technology, booking an appliance repair service is now easy and affordable. You no longer need to travel to your local market to get your appliances repaired; you can now book a service online and have someone visit your home and repair your appliances.

Appliances like air conditioners and refrigerators used daily need immediate repairing services in case of any functional issues. It makes sense to get an immediate and efficient service booked online in such cases. In metro cities like Pune, repairing appliances is now easy with online services such as MyGate, which offer quick, hassle-free and affordable appliance repair services.

Why use MyGate appliance repair services?

MyGate offers doorstep service for appliance repair and expert technicians who make appliance repair a stress-free process. Book now to avail exclusive discounts and offers on your repair services. Enjoy hassle free service at your doorstep.

Affordable: MyGate offers professional appliance repair services at competitive market rates.
Expert team: Our technical team is well trained and are experts in their field. Our verified partners repair your appliances with best-in-class industry protocols and equipment.
High-quality parts: In the case of appliance repairs, we ensure the use of 100% genuine parts for repairs and maintenance.
Convenient: You can book appliance repair services via the MyGate app in 3 easy steps. Our team will be at your doorstep within 4 hours of booking. You can cancel or reschedule the booking anytime at no extra charges.
Covid safe: We sanitise the equipment, tools and appliances before beginning the repair service. All covid protocols are followed along with masks and gloves by our staff.
Group discount: If you stay in a gated community in Pune, you can now avail of group benefits and discounts. Avail great offers as a community and get your appliances repaired!

Areas Served in Pune

We serve all major areas in Pune. Our service areas in Pune include but are not limited to Kothrud, Shivaji Nagar, Balewadi, Koregaon Park, Viman Nagar, Aundh, Pimpri, etc.

How Does it Work?

Follow these simple steps to book your appliance repair service:

• Step 1: Download the MyGate app. Click here.
• Step 2: Go to the ‘My Home’ section. Click ‘Appliance repair’.
• Step 3: Choose the services as per your requirement. We have services for all major appliances such as microwave, AC, TV, Wifi, fridge, Laptop, vacuum cleaner etc.
• Step 4: Fill in all the required details and confirm your booking. Once your order is confirmed, our team will be available at your door at the scheduled time.

FAQs regarding appliance repair services in Pune

Home Services