Table of content

    Did you know that your toilet seat is one of the cleanest places in your home? As compared to other things, such as the TV remote, mobile phones, or computer keyboards, toilet seats have fewer germs. However, that doesn’t mean it won’t need regular cleaning.

    A stained toilet not only causes embarrassment but also infections from the germs and the mold present in that area.

    Ideally, a toilet should be cleaned every 2-3 days. And this should include disinfecting the toilet seat, the exterior of the toilet as well as all the other surfaces of the toilet.

    Removal of stains, dirt, and mold and disinfecting the toilet seat is a necessity as these steps ensure a hygienic toilet, free of germs and bad odor.

    Here are some useful tips on how to clean a stained toilet for a stain-free, germ-free, and odorless toilet in minutes.

    How to clean toilet seats at home

    First, open the windows of the toilet to let in the fresh air and expel the stale air. Next, make sure that you have a toilet brush, a pair of gloves, an old toothbrush, toilet cleaner, a clean sponge, a non-bleach spray, and a disinfectant or a toilet cleaner.

    • Spray some non-bleach spray/disinfectant on the toilet seat, under the seat, and on the lid. 
    • Leave it for a minute and then scrub the seat and the lid using a sponge.
    • Then, pour the liquid on the hinges and the bolts and leave it for a minute.
    • Scrub the lid and the hard-to-reach places with an old toothbrush.
    • Finally, wipe it down with a damp towel.
    • Repeat in case the stains on the seat and the lid are still visible.

    How to clean discolored toilet seats

    Unsightly urine stains on the toilet seat are very embarrassing. A chlorine bleach might kill the germs, but the stains might still stay. So, if you are wondering how to clean yellow stains on the toilet seat, here’s an easy, gentle way out.

    • Spray some toilet cleaner on the seat and leave it for a few minutes.  Then wipe it off with a damp towel.
    • Next, mix ¼ cup baking soda and ½ cup warm water in a bowl. Make a paste and apply it to the stained areas. 
    • Leave the paste on the stained area for 15 to 20 minutes.
    • Scrub the seat with a scratch-free wet sponge gently to avoid scratches on the seat.
    • Repeat till the stains are gone.
    • Rinse the seat with water and wipe dry.

    How to clean yellow-stained toilet bowls

    Yellow stains in a toilet bowl are most prominent and can be upsetting to the users. To clean yellow stains from toilet bowls, all you need include some baking soda, some vinegar, a toilet brush, and a damp towel. 

    • Sprinkle the baking soda on the yellow area and gently scrub it with a brush. 
    • Then, spray or pour some vinegar on the scrubbed surface and leave it on for 15 minutes.
    • And, finally, rinse it well with clean water.
    • Repeat if the stains are still visible.

    How to clean brown stains on a toilet

    The brown spots on the insides of the toilet bowl are caused by rust deposits of iron oxide. To clean these spots, follow these steps:

    • Pour two liters of vinegar into the bowl and leave it overnight.
    • Or make a paste of vinegar and salt and apply it to the brown-stained area with a toothbrush.
    • Leave the paste on for a few hours and then flush.

    Clean toilet in minutes

    Lack of time to clean leads to a stained toilet. We all are busy juggling ten things at a time, which leaves no time to clean our homes. But, it takes just a few minutes and some household ingredients to clean the most important areas in the house, like the toilet. 

    If you are wondering how to clean a very stained toilet in minutes, here are a few tips:

    • Pour a cup of vinegar into the toilet bowl.
    • Spread it all over the bowl with a toilet brush.
    • Next, pour a cup of baking soda and a cup of vinegar over the stained area.
    • Allow the mixture to sit for a few minutes.
    • Finally, scrub the insides of the toilet bowl with a brush and flush.

    You will have a sparkling, hygienic, and germ-free toilet bowl and toilet seat in minutes!

    Conclusion

    Maintaining a clean toilet should be a part of your weekly cleaning routine. You can use kitchen ingredients, such as baking soda, vinegar, salt, and lime, to clean stubborn stains from the toilet bowls and seats. But using a commercial toilet cleaner to kill germs and sterilize toilets is essential too. This will ensure not only a sparkling toilet but also the health of your family and their safety from germs and infections.

    Did you know that the quality of your life can be measured by looking at how well you maintain your bathroom or washroom tiles? A clean mind and body are directly proportional to the level of hygiene in the bathroom. It is no secret that the bathroom has maximum traffic day and night, which makes it susceptible to all kinds of impurities, including mold, fungus, and other kinds of harmful bacteria.

    The beauty of the entire home can be preserved by making sure that the bathroom wall tiles and washroom tiles are kept clean. If you can get the bathroom floor tiles professionally cleaned by experts, it would go a long way in enhancing your home’s overall sanctity and beauty quotient.

    Why is tile cleaning important?

    Regular cleaning of the bathroom floor tiles ensures an enhanced life span of the bathroom flooring. Tiles are prone to get dirt and grime accumulated in between the grout joints, which can lead to deterioration of the floor quality in the long term. It can also lead to an unhygienic environment. Laying floor tiles in metro cities entails a lot of expenses. A stitch in time saves nine. Prevent paying costly medical bills due to accidental body falls on damp surfaces on the bathroom floor.

    Bathroom tile cleaning and aesthetics

    People living in the most happening metropolitan cities in India understand the need to spruce up the interior beauty of the home. The home should be kept sacred by eliminating the harmful bacteria that gets lodged under and in between the tiles.

    A wonderful ambiance in the washroom will go a long way in making the entire living place vibrant and exciting. Old bathroom tile cleaning services are the most sought-after service for busy urbanites who seldom find time to do house chores. With the advent of professional cleaning services, including cleaning for bathroom wall tiles, you can relax and binge-watch your favourite series on Netflix and chill the heaven out. Let the professionals take complete care of your bathroom and washroom.

    DIY bathroom floor and wall tile cleaning

    In case you feel that the bathroom wall tile cleaning cannot wait, here is a rundown as to how to carry out the disinfectant operation of the washroom floor tiles on your own.

    Household ingredients for bathroom wall tile cleaning

    • Salt
    • Vinegar
    • Spray bottle
    • Sponge and scrubbing pad
    • Microfiber cloth
    • Cleaning products

    Step 1: Spot-treatment of visible stains

    The first step is to prepare a mixture containing half a cup of vinegar and water of the same quantity. Spread the mixture on the stains on the affected area using a spray bottle. Wash the whole area with water and scrub it properly with an old toothbrush. Salt can be used in case of hard water stains. The function of salt is that it is a wonderful disinfectant and eliminates germs in the surrounding areas. Ensure that the affected area is wet and, at the same time, use an adequate amount of salt to clean the premises. After the stained area is liberally sprinkled with salt, make sure that the whole setup undergoes settlement for 60 minutes. Now make use of a scrubber to remove the salt. You will observe that the stain has completely gone. To remove any traces of remaining stains, make sure that you use a concentrated solution of water and vinegar. This step is a sure-shot procedure and is highly effective in cleaning washroom tiles.

    Step 2: Complete cleaning of bathroom wall tiles

    Effective bathroom cleaning makes the whole washroom radiate with hygiene and positive vibes. It is quite easy to complete the process of bathroom wall tile cleaning with the right tools and materials. You need some hot water vapours, baking soda, and lemon juice. The initial step would be to run a hot shower. The vapours emanating from the hot water will react with the grime lodged on the bathroom tiles and soften it.

    Now take a container and prepare a mixture of a half cup of baking soda and an equal amount of lemon juice and pour it into a bucket of warm water. You can then apply the mixture nicely on all surfaces. Once you ensure that the entire surface is totally scrubbed, allow it to settle for a couple of minutes. Immediately after that, make use of a disinfected sponge made wet through water dampening and wipe the entire surface clean. Bathroom cleaners available at the local stores can provide a clean finish. These bathroom products ensure that the soap sediments are cleanly washed off the whole surface.

    Step 3: Comprehensive cleaning of bathroom floor tiles

    A vacuum cleaner can loosen the dust and dirt particles on the bathroom floor. It is advisable to start from the farthest point of the bathroom door and slowly work toward the central point. The cleaning of the bathroom floor tiles should immediately follow after cleaning the walls. The walls can be completely vacuumed, and after that, the floor tiles can be swept to remove any loose hair strands. The process can be carried out using an appropriate floor cleaner such as sodium hypochlorite solution. This solution has the capability to completely eliminate germs, helping to restore cleanliness, safety, and hygiene in the washroom premises.

    Step 4: Cleaning grout

    Grout is the space present between the tiles. Germs and bacteria trapped in the grout spoil the aesthetic appearance of your washroom tiles. A washroom is a kind of a sacred place where everything needs to be beautiful and free of germs and should radiate a positive feeling whenever you take a bath.

    The porous grout is the ultimate lightning rod that attracts all kinds of moisture and dust particles. Prepare an effective bathroom cleaning solution in a bowl consisting of one cup of white vinegar and the same quantity of water. After spraying generous amounts of the solution onto the grout, wait for 20 minutes and then take hold of a rugged toothbrush and scrub the particles on the grout. After the whole process is complete, make sure to rinse the area with plain water and wipe it off with a microfiber cloth used to dry the tiles.

    Step 5: Removing mould

    Damp conditions in the washroom or bathroom can lead to the growth of a dangerous fungus called mold, which is very harmful to young children with weak immune systems. It is, therefore, a fundamental responsibility of modern educated urbanites to eliminate damp spots in the washroom. The probability of mold growing in the washroom is particularly more in humid regions where there is a lot of moisture retention in the washroom and the level of pollution is also high.

    In the majority of the cases, the mold formed in the bathroom is non-toxic. It is recommended to clean the mold with a scrub and cleansing solution to prevent huge growth. Take a cup of vinegar and put it in a spray bottle. Do not add water and directly spray the vinegar on the mold-infested area. Let the whole situation settle for 60 minutes after which the entire area can be cleaned with a microfiber cotton cloth.

    Step 6: Tile maintenance

    It is expensive to replace bathroom tiles on the floor and the wall. The hygiene-conscious residents of big cities feel the need to maintain the luster and shine of the bathrooms as much as they can since the washroom is a symbol of the aesthetics of the entire home.

    The above steps can be completed quickly and comfortably by breaking the entire task into smaller sub-tasks. Disease-causing germs are one of the unwanted side effects of dirty tiles. Using sodium hypochlorite as an active ingredient goes a long way in the hundred percent removal of germs.

    Conclusion

    Maintaining clean tiles in the bathroom and washroom is a status symbol for most house owners. Guests arriving at your home will be impressed and have a positive impression of your family when they see impeccably maintained washroom tiles. In this era of modern living, where perception is the key, it is vital to make a quality impression on your colleagues and family friends. In case of non-availability of time and energy, hiring a tile and grout professional cleaning company is always recommended to eliminate the need for hard physical labor from your side. For many people living in the urban metro areas with both spouses working, it makes sense to invest in a washroom tile cleaning company to enjoy peace of mind and upgrade the quality of life.

    Table of content

      Your daily toilet cleaning checklist

      Cleaning the toilet and bathroom is one of the most challenging household tasks. It is prone to dirt, grime, germs, and infections, yet it often takes a backseat on people’s checklists. Many people don’t even know how to clean a toilet properly. Just washing away the dirt you see is not the way to go about it. It is crucial to use proper cleaning products and disinfect the space. Don’t forget – it is one of the most used spaces in your house. Some people even judge others on the cleanliness of their toilets and bathrooms. 

      Toilets are generally damp, which can easily make them a breeding ground for germs and infections. Cleaning them every day is of utmost importance. And, you should deep-clean them every two or three days. It does not have to be a dreadful and frightening task. If you are looking for the best ways to clean a toilet, you have reached the right place. We are sharing a daily toilet cleaning checklist with you, which should be your talisman for the future:

      1. Disinfect the entire toilet seat, including the bowl.
      2. Mop the toilet floor.
      3. Wipe the counters and sink. Give it a quick rinse every day. You can sanitise it on alternate days.
      4. Take out the trash every day. 

      Follow these simple habits daily to sort your cleaning schedule. Keep reading as we take you through the process in detail. 

      What does disinfecting the toilet bowl mean?

      It is the most challenging part of the toilet cleaning process for most people. Many people either don’t know how to clean toilet stains or have reached a state wherein they don’t even want to try it out themselves. But, the necessary thing is to be regular with this process. It will ensure that your toilet is always crystal clean. 

      There are essentially two types of toilet seats – Indian and western. While most houses nowadays have a western commode installed, some have Indian ones. The process is pretty much similar for both. Take a suitable cleaning agent and a long-handled angular toilet brush. Pour the liquid cleaning agent around the toilet bowl and the rim. Let the liquid spread from the rim to the U-bend in western toilets. Leave the cleanser on for 20 minutes. After that, scrub the toilet gently using the toilet brush and flush. Keep scrubbing as you flush. 

      Don’t ever mix acid and bleach. You can drop a few antacid tablets or some cola drink in the toilet bowl. Let it stay for 20 minutes – it works like magic.

      Pro-tip: You can also clean the insides of the rim using an old toothbrush. It will help you reach the farther ends with great ease.

      How to clean the toilet seat?

      You are not just supposed to focus on the insides of the seat but the exterior as well. After all, this is the area that directly touches you when you go. A dirty, unsanitised toilet seat is known to spread diseases like UTIs. We expect this from the public toilets anyway. At least the toilets at our homes must be dependable. So, are you sitting and wondering how to clean toilet seats to perfection? It is easier than cleaning the insides. All you need is an excellent disinfecting agent and a cotton cleaning cloth. 

      Once you are through with the bowl, cover it with the lid and pour/spray the disinfecting agent all over the seat, edges, tank, lid, and base. Do not leave any nook or crevice uncleaned. Scrub everything properly. Before you end up spoiling your seat, do a patch test with the cleaning agent, just the way you do it with a new skincare product. In the end, wipe the seat using the cotton cleaning cloth.

      The base of the toilet requires regular cleaning too. It can be cleaned with a solution of vinegar and water in the ratio of 2:1. You can pour this solution into a spray bottle for convenience. Spray it on the base of the toilet seat, which is attached to the floor. Let it stay for about 20 minutes, followed by a scrub using a sponge and then a thorough rinse. You can also use this solution to clean the sink and faucets. 

      What are hard water stains, and how to remove them?

      Water with a high content of minerals like calcium and magnesium is called hard water. It sometimes leaves stains on the toilet seat or sink. Don’t worry; our home remedies make for the best toilet cleaning tips. Pour one cup of vinegar inside the toilet and let it sit for a minute before scrubbing the insides with a long, angular toilet brush. Then add one cup of baking soda along with another cup of vinegar. Let this solution sit for about five minutes. Both will begin reacting, thereby enhancing the cleaning process. Now scrub the toilet bowl again and flush the dirt away. You have got yourself a sparkling and clean toilet.

      This process will also help remove the yellow stains from the toilet bowl. If those stains still do not go away, add baking soda separately and scrub it in. Then, pour vinegar on the stains and let it sit for half an hour before rinsing. 

      Conclusion

      The saying that cleanliness is next to godliness will never go out of fashion. Clean people are healthy people. And, there is no better place to start the cleaning spree than your own home. Don’t forget that the place where you clean yourself also needs to be cleaned. The past two years have shown us nothing but the spread of diseases. So, we felt that it was crucial to shed light on this topic. Sanitization is the need of the hour. Follow the steps mentioned above for a spotless toilet. And, do add a toilet freshener for some freshness.

      How to Clean a Toilet Seat

      The Essential Guide On How To Clean Toilet Stains

      About MyGate

      MyGate is India’s largest housing society management app, benefiting thousands of housing societies, developers, society facility managers, and millions of homeowners in every Indian city.

      Home Services
      Table of content

        Keeping a clean home is something all of us take pride in, but the one thing that makes us queasy is cleaning the toilet. No matter how appealing your house looks, having a clean toilet is essential for your home hygiene and staying healthy.

        An unkempt toilet is a breeding ground for germs, diseases, and smells bad to boot. Well, and let’s face it, no one feels like using a smelly, stained toilet.

        While we may all be familiar with how to clean a toilet, specific stain removal may not be something with which we are familiar. Here is an essential stain removal guide to keep our toilets spic and span.

        Cleaning and disinfecting a toilet bowl

        Let us begin with the basics and discuss how to clean a very stained toilet bowl. This should not take more than 5 minutes.

        What you’ll need

        1. A good toilet brush
        2. A toilet cleaner and disinfectant like Harpic/Domex
        3. A plunger (optional)
        4. A bucket

        The process

        Let us begin with the importance of a good toilet brush. A good toilet brush ought to have a comfortable handle and a head that is shaped to give you access to all the nooks and crannies of the toilet bowl. The bristles on the brush must be stiff enough to get rid of stains but should not flick dirty water outwards.

        Start the cleaning process by reducing the amount of water in the toilet bowl to allow the toilet cleaner to disinfect the bowl effectively. While you could use a plunger to do this, an easier way would be to fill a half bucket with water and pour it towards the back of the toilet with moderate force. This acts as a flush and helps drain most of the bowl’s water.

        The next step is applying the disinfectant and cleaner. Begin under the upper rim of the toilet and apply it to coat the sides of the bowl thoroughly. This is fairly easy since most cleaners come with angled spouts. 

        Then let the cleaner sit for a few minutes. If the bowl has old and stubborn stains, you could let the cleaner rest for ten minutes or more.

        Now, it is time to begin scrubbing. Start from the top and work your way down, applying extra pressure whenever you need to clear a stain. Be sure to spend extra time under the rim, on the top, and in the drain since these areas have the most germs.

        All that’s left for you to do now is flush the cleaner out. Remember to scrub gently while the flush does its job to avoid splashing and partially clean the brush simultaneously. 

        Yellow stain removal from the toilet bowl

        Sometimes, yellow stains are extra stubborn and difficult to remove. Here’s a guide on how to clean a yellow-stained toilet bowl using common household items.

        What you will need

        1. Baking soda
        2. A solution of two parts vinegar to one part water
        3. A spray bottle
        4. Toilet cleaning brush

        The process

        First, apply a liberal baking soda over the yellow stains and brush it vigorously. Then, spray the vinegar and water solution over the area and let it rest for a few minutes.

        Once again, work the area over with the brush and rinse it with water. Your stubborn yellow stains should have vanished. If there are still signs of the stains, repeat the process once again to rid your toilet bowl of the yellow stains.

        Brown stain removal from the toilet bowl

        If you see brown spots inside your toilet bowl, these are caused by rust or iron oxide. Here’s a guide on how to clean brown stains on the toilet bowl.

        What you will need

        1. Vinegar
        2. Salt (optional)
        3. An old toothbrush (optional)

        The process

        If the spotting is inside the bowl, all you need to do is pour a generous amount of vinegar into the bowl and let it rest for a few hours, preferably overnight. Then flush the toilet, and your stains will disappear.

        If these brown spots are near the rim, you will need to apply a paste of vinegar and salt using an old toothbrush. Let this rest overnight and flush it out in the morning to remove the brown spots.

        Cleaning the toilet seat and the exterior of the toilet

        Your job is only halfway done. Now that you have cleaned the toilet bowl, let us get to how to clean yellow stains on a toilet seat as well as the exterior of the toilet.

        What you will need

        1. A toilet seat disinfectant spray
        2. The toilet cleaner and disinfectant you used for the bowl
        3. Paper towels or dry cleaning rags
        4. An old toothbrush

        The process

        Pour the disinfectant and cleaner onto the toilet seat. Cover the corners and edges properly since these areas have a lot of hidden grime. Then continue to cover the rest of the external surfaces of the toilet bowl.

        Start cleaning the surfaces and the hidden areas with an old toothbrush. Don’t be afraid to break out the elbow grease! Once you have thoroughly scrubbed all these areas, wipe them with paper towels or dry cleaning rags.

        Wait, there’s more to do. Spray a toilet seat disinfectant onto all the toilet surfaces you are likely to touch often, such as the lid, the flush, the tank, and the seat. These sprays contain sodium hypochlorite, a highly effective chemical in getting rid of harmful germs. In addition, they also leave a pleasant fragrance when you’re done.

        Start wiping the bowl with a dry rag. Always start from the top and work your way down. If the cloth becomes wet, swap it out for a dry cloth. 

        Cleaning the toilet base

        The toilet base, where the toilet meets the ground, also requires regular cleaning. Once again, you need some common household items.

        What you will need

        1. A solution of two parts vinegar to one part water
        2. Dishwashing soap
        3. A spray bottle
        4. A scrubber

        The process

        Make a cleaning solution using two parts vinegar, one part water, and a few drops of dishwashing soap. Mix this thoroughly and pour it into a spray bottle. Spray the cleaning solution on the toilet base and let it rest for around 20 minutes. Then work the area using a scrubber and rinse it with water.

        Pro tips

        1. Regularly cleaning your toilets goes a long way in keeping you and your family healthy. While you ought to clean the toilet bowl at least twice a week, it is advisable to clean the entire toilet using the steps mentioned above once a week or once in a fortnight, depending on the amount of traffic the toilet sees.
        2. If you live in a gated community or apartment building that uses a community management app like MyGate, you may find offers and discounts from professional cleaning services to help you out as well.
        3. Keeping your toilet brush clean is as important as cleaning the toilet itself. Once you are done cleaning the toilet, be sure to rinse the brush in hot running water. Then, spray it with a disinfectant to kill the germs and dry it out in the sunlight. 

        Now that you know how to clean stained toilets, it is time to get started to give your toilet space a fresh and clean look!

        How to Clean a Toilet Seat

        Wipe Your Worries With These Easy Toilet Cleaning Tips

        About MyGate

        MyGate is India’s largest gated society maintenance system, benefiting thousands of housing societies, developers, society facility managers, and millions of homeowners in every Indian city.

        Home Services
        Table of content

          Relocation to a new place can be daunting and exhausting if you haven’t prepared yourself for the move beforehand. It goes without saying that the first and foremost requirement would be to hire a professional movers and packers agency who can handle your cargo with care (and plenty of bubble wraps). But there are some equally important steps to take to make the transition stress-free and smooth from day one. Practical moves require precise planning. Here’s our compilation of basic but essential tips for shifting to a new environment, applicable for homeowners as well as tenants (for temporary or permanent relocation).

          Forward your mail/correspondence

          If you’re receiving regular subscriptions or monthly deliveries on your old address, change it to the new address well in advance so that there’s no mix-up once you move in. This could include changing the address on digital e-commerce platforms also since out of habit, you could just end up ordering products delivered to the old address and cause unnecessary inconvenience. 

          Get to know the neighbors

          It’s ideal to meet and greet your neighbours and exchange pleasantries. This is not just a formality or an obligatory action but also a genuine gesture to show goodwill and community bonding. Besides, if you’re moving to a new town, befriending the neighbors is the first step. Introduce yourself at a convenient time and exchange numbers if needed. Your neighbours can keep an eye on your house while you’re away and can help you out during emergencies. It’s also a good idea to organise a housewarming party and extend invites to your neighbours. 

          Know the utility/daily supplies sources

          Another imperative step after the relocation is to scout the neighborhood for essential supplies and utilities such as cable, internet, groceries, etc. You must plan and get the gas and light meter activated on the day of moving so that it provides that much ease. Try the nearby eateries and explore the area like a local to get a feel of the place and get oriented towards the neighborhood. 

          Apply security measures

          Check the current security practices in place in the housing society and accordingly deploy your own security measures. For instance, if your society has only security guards and limited CCTV cameras, you could install smart doorbells and locks to tighten your home’s security. If you’re so inclined, you could also invest in a home security system equipped with sensors, motion detectors, locks, and alarms. 

          A society with an intelligent society management app like MyGate can provide end-to-end gate security with passcode verification-based entry/exit makes the security of your home robust from the get-go. The solution ensures that no unwanted or suspicious visitors can enter the society premises without prior approval from the resident. 

          Learn about the society rules

          Every society has codes of conduct, maintenance bill practices, and distinct bylaws. You must be aware of every pertinent rule in the beginning. Eventually, you can settle in and look into the details of the bylaws but initially, you must know the below:

          Meet the MC/RWA members/Secretary

          A single point of contact would suffice at the beginning, i.e. you could introduce yourself to either the Secretary or any other committee member who’d be able to answer your questions and be available to help you get familiar with the community rules. 

          Trash Management

          Nowadays housing societies have special protocols for the segregation of dry, wet, and toxic waste. Quite a few societies may even have composting units for which wet waste is collected from each household. Plastic recycling procedures may also be applied in some cases. Inquire about the waste disposal procedure so you can arrange for appropriate waste handling supplies like color-coded trash cans.

          Figure out the parking space allotment

          If you have a two-wheeler/four-wheeler, you must get yourself a parking slot assigned. You may be assigned a temporary spot initially until the MC can find a permanent place for your vehicle. You must also be aware of the parking charges per month. 

          Be aware of any unknown variables

          Some areas in and around your neighborhood may be unsafe or unsavory. There may also be some specific towers or floors in your society that may be sealed due to Covid positive cases. Inquire about such restrictions or safety measures once you move in. 

          MyGate society management app has tie-ups with reputed grocers, food delivery apps and provides discounts on medicines with Covid proof delivery protocols in place which you must avail for convenience and safety. 

          Experience the best of German-engineering.

          The all new Volkswagen Taigun has been the most anticipated SUVW all year. And, guess what, it’s coming to your society this weekend. Get hands-on experience on its drive quality, features, comfort & much more.

          Fasten your seat belts and get ready!

          Book Test Drive
          What’s new on MyGate